Technologie
-
10.10.2024
Sustainable machining with hydraulic chucks: High efficiency and long service life
Hydraulic chucks contribute to sustainability in machining. The clamping technology conserves resources, improves workpiece quality and reduces energy consumption.
-
07.08.2024
Empower Your Aluminium Machining
Aluminium materials are increasingly being used in various industries. MAPAL is the leading technology partner for the machining of aluminium components.
-
02.07.2024
Aluminium expertise in focus at the annual press conference
At the annual press conference in Aalen, the focus was on the annual report, innovations for AMB and aluminium machining.
-
29.05.2024
Machining titanium economically
For economic results in titanium machining, tool technology and process must be optimally designed. A case for MAPAL.
-
08.04.2024
IMPULSE 82 has been published
Developments, solutions and applications for the aerospace industry are the focus of issue 82 of the MAPAL technology magazine IMPULSE.
-
11.01.2024
Major process improvements in the machining of axial piston machines
MAPAL has developed profound process solutions for the economical and precise machining of axial piston machine components.
-
04.12.2023
Aluminium machining in new dimensions
Impressive material removal rates - bavius cuts over 20 liters per minute with aluminum high-volume milling cutters from the tool manufacturer MAPAL.
-
22.11.2023
Development of customised diamond coatings
MAPAL develops extremely hard and wear-resistant diamond coatings for machining materials such as CFRP, ceramics, graphite and aluminium alloys.
-
26.10.2023
Investing in health, sustainability and quality
MAPAL has commissioned a new, unique laser hardening system for series production - with significant added value.
-
19.10.2023
"MAPAL's focus has always been and will always be on the customer."
CTO Jacek Kruszynski on structures, development priorities and plans in the area of digitalisation.
-
07.08.2023
MAPAL at the EMO 2023
MAPAL will be presenting itself in Hall 4, Stand A18 with the focus industries, Innovations 2024, the Online Shop and new developments on the subject of sustainability.
-
25.01.2023
Gnutti Carlo Group relies on c-Com digital tool management
The Gnutti Carlo Group implements a digital tool management solution from c-Com for its worldwide locations.
-
12.01.2023
Basic–Performance–Expert
MAPAL clusters its machining solutions for electromobility components into solution stages, depending on the precision requirements and production volume.
-
16.11.2022
Green tools protect resources
The use of minimum quantity lubrication is a lever for saving resources in production. MAPAL offers almost all tools in variants for MQL.
-
10.11.2022
CFRP demo part for trade fairs and events
A generic component developed in collaboration with the National Manufacturing Institute Scotland demonstrates MAPAL's expertise in CFRP machining.
-
19.10.2022
Why hydraulic chucks are more sustainable
Service life, energy balance, handling: Why hydraulic expansion chucks have clear advantages over shrink chucks in terms of sustainability.
-
12.09.2022
Customer needs as an impetus for innovation
At the AMB in Stuttgart, MAPAL will be presenting new products and innovative machining solutions for the focus industries, thereby increasing the competitiveness of customers.
-
-
22.03.2022
The Digital Twin is Showing its Teeth
Quality assurance and error detection in production through real-time data analysis is promised by the Machining Analytics Solutions module from c-Com.
-
10.03.2022
Titanium Machining Takes Off
MAPAL is making drilling and milling of the ductile, high-strength workpiece material more productive, thereby reducing costs.
-
25.10.2021
IMPULSE — edition 76 is available
News on e-mobility. New tools for machining titanium as well as valve housings and pot-shaped stator housings. A new module from c-Com.
-
04.10.2021
Continuous process for electromobility
Topfförmige Statorgehäuse für Elektromotoren sind aufgrund ihrer Dünnwandigkeit und engen Toleranzen anspruchsvoll zu bearbeiten. MAPAL liefert den kompletten Prozess.
-
04.10.2021
MAPAL erhält Landesmittel für Digitalprojekt
Umwelt- und ressourcenschonende Zerspanung – MAPAL forscht mit renommierten Partnern. Kern des Projekts ist die genaue Analyse von Daten.
-
16.08.2021
IMPULSE — Ausgabe 75 ist da!
Entdecken Sie smarte Lösungen sowie das Potenzial der Tooltronic und der radialen Fräswerkzeuge NeoMill von MAPAL.
-
07.04.2021
IMPULSE Ausgabe 74 ist da!
Die neue Ausgabe von Impulse liegt bereit. Ein Schwerpunktthema ist der Marktstart von MAPAL im Werkzeug- und Formenbau.
-
01.04.2021
E-Mobilität: Neuer Katalog
Elektrifizierte Bauteile, ihr Aufbau, ihre Anforderungen und die Bearbeitungskonzepte von MAPAL - alles anschaulich bebildert und erklärt.
-
08.02.2021
Stahlträger wirtschaftlich und prozesssicher bearbeiten
Der flexible Einsatz von Stahlträgern in vielen Bereichen geht einher mit eng definierten Herstellungstoleranzen. Wie MAPAL zu hoher Prozesssicherheit beiträgt.
-
01.01.2021
Höchste Standzeiten in CFK dank Diamantbeschichtung
Warum MAPAL auf die Technik von SP3 setzt, was deren Anlagen besonders macht und wo genau das meiste Know-how beim Beschichten mit Diamant steckt …
-
04.12.2020
Elektrifizierte Mobilität
Kleine Gehäuse für Elektromotoren aus Magnesium und Aluminium prozesssicher bearbeiten
-
23.06.2020
Vom Prozess gedacht – Entwicklungspartnerschaft von Maschinen- und Werkzeughersteller
Zwischen ELHA und MAPAL besteht eine langjährige Entwicklungspartnerschaft. Daraus ergeben sich erhebliche Vorteile für die Kunden.
-
15.05.2020
Kosten senken mit ausgefeilten Werkzeuglösungen
Werkzeuge haben Einfluss auf die Gesamtbetriebskosten einer Bearbeitung. Es lohnt sich, bei der Anschaffung die Gesamtbetriebskosten in den Fokus zu rücken.
-
14.05.2020
Prozesssicherer Spanbruch bei der Feinbearbeitung von Stahl
Eine neue Spanleitstufe, speziell auf die Zerspanung von Stahl hin konzipiert, schafft Prozesssicherheit.
-
01.05.2020
Für kurze Bearbeitungszeiten – Wirbeln statt Schleifen
Warum Wirbeln sich bei Kugelrollgewinden lohnt, was das mit Kugelbahnfräsern zu tun hat und welche Rolle die Additive Fertigung dabei spielt.
-
09.03.2020
Technischer Berater in der Tasche – c-Com Verschleißerkennungs-App
Verschlissene Schneiden werfen Fragen nach Art, Ursache und zukünftiger Vermeidung auf. c-Com hat die Antworten.
-
17.01.2020
Mit additiver Fertigung zu mehr Produktivität - Glockenwerkzeug zur Außenbearbeitung von MAPAL
Leichtere PKD-Werkzeuge bedeuten in der Regel deutlich höhere Schnittdaten. Ein Beispiel dafür ist das neue Glockenwerkzeug von MAPAL.
-
15.01.2020
Guss- und Stahlbauteile wirtschaftlicher fräsen
Das neue Fräserprogramm mit radialen Wendeschneidplatten von MAPAL zeigt sein Potenzial in konkreten Anwendungen.
-
01.01.2020
Kooperationen, Kundenportale und künstliche Intelligenz
c-Com entwickelt nicht nur eigene Applikationen, sondern erschließt Mehrwerte für die Kunden durch enge Zusammenarbeit mit Kooperationspartnern.
-
01.01.2020
Komplettanbieter im Werkzeug- und Formenbau
Warum MAPAL als Komplettanbieter im Werkzeug- und Formenbau ein Alleinstellungsmerkmal hat und wie Kunden davon profitieren.
-
01.01.2020
Der neue FaceMill-Diamond – prozesssicheres Planfräsen mit hohen Standzeiten
Wie MAPAL dank einer umfassenden Weiterentwicklung die Produktivität des PKD-Planfrässystems FaceMill-Diamond gesteigert hat.
-
02.12.2019
Digitale Beschichtungsabwicklung – effektiv, nachhaltig und transparent
Bei der Wiederaufbereitung von Werkzeugen ist der Aufwand für die Auftragsabwicklung oft sehr hoch. Oerlikon Balzers und c-Com entwickeln deshalb gemeinsam eine App.
-
25.11.2019
Reduzierte Rüstzeit, maximale Werkzeugstandzeit – Kooperation von MARPOSS und c-Com
Bündeln Unternehmen ihre Kompetenzen, erschließen sie oft deutliche Mehrwerte für ihre Kunden - wie bei der Zusammenarbeit von MARPOSS und c-Com.
-
08.11.2019
Turbolader prozesssicher und wirtschaftlich in Serie fertigen
Hersteller von Turboladern stehen bei der Zerspanung vor Herausforderungen. Wie MAPAL den gesamten Prozess wirtschaftlich und effizient gestaltet.
-
01.09.2019
Hochleistungsfräser für die Bearbeitung von Strukturbauteilen
Axel Fleischer im Interview über Herausforderungen, Chancen und neue Potenziale in der Luftfahrtindustrie mit Hochleistungsfräsern von MAPAL
-
16.08.2019
Einfachstes Handling beim Außenreiben kleiner Durchmesser
Ein einfaches Handling beim Außenreiben macht die Bearbeitung von Passungen noch prozesssicher und wirtschaftlicher
-
25.07.2019
Deutlich bessere Oberflächen dank Schwingungsdämpfung
Die neuen Fräseraufsteckdorne mit integrierter Schwingungsdämpfung von MAPAL verbessern Oberflächengüten erheblich. Prozesssicherheit und Zeitspanvolumina steigen überdies.
-
01.07.2019
E-Motorengehäuse gehen prozesssicher in die Großserie
Für die komplette Bearbeitung von Gehäusen für Elektromotoren bietet MAPAL serienreife, prozesssichere und absolut präzise Werkzeuglösungen.
-
28.05.2019
MAPAL Expertentag beleuchtet Potenziale bei der Stahl- und Gussbearbeitung
Wissenschaftler, Anwender und Werkzeugspezialisten zeigen vielfältige Möglichkeiten der Effizienzsteigerung auf. Teilnehmer sind begeistert.
-
01.05.2019
Digitalisiertes Nachschliffmanagement – Transparenz und Effizienz dank c-Com
Das Management der Werkzeuge ist oft der kritische Punkt im Nachschleifprozess. Wie MILLER diese Herausforderung meistert.
-
01.05.2019
MAPAL übernimmt südkoreanischen Hersteller von PKD- und PcBN-Ronden
Seit Jahren arbeiten ADICO und MAPAL bereits zusammen. Ende 2018 hat MAPAL das Unternehmen vollständig in die Gruppe integriert.
-
27.03.2019
c-Connect – Die Fertigung in kleinen Schritten digitalisieren
Wie Zerspaner mit c-Connect ihre Fertigung digitalisieren, ohne den vorhandenen Maschinenpark komplett zu modernisieren.
-
01.01.2019
Mobilität im Wandel
Maschinenhersteller Heller entwickelt gemeinsam mit MAPAL einen Prozess zur Serienfertigung eines Statorgehäuses
-
01.09.2018
Schwingungsanfällige Strukturbauteile prozesssicher bearbeiten
Wie Kunden mit einer Komplettlösung von MAPAL anspruchsvolle Strukturbauteile wirtschaftlich und prozesssicher zerspanen.
-
01.09.2018
Kordelschruppfräser OptiMill-Uni-Wave
Große Schnitttiefe, optimale Spanabfuhr und hohes Zeitspanvolumen – der neue Universalfräser von MAPAL für die Stahl- und Edelstahlbearbeitung.
-
01.09.2018
Miniaturisierung in der Spanntechnik dank additiver Fertigung
Additiv gefertigte Hydrodehnspannfutter im Kleinformat von MAPAL bedienen den Trend zur Miniaturisierung. Sie erfüllen höchste Ansprüche.
-
01.08.2018
Außenreibahle sichert hochpräzise Zylindrizität
Für die Fertigung von Planetenträgern setzt Karl Völlm auf Präzisionswerkzeuge von MAPAL.
-
01.06.2018
Ratterfreier Prozess mit Werkzeugen von MAPAL
Tangential-Schruppwerkzeuge weisen eine Ungleichteilung und einen Bogenschliff auf. Sie kompensieren Ratterschwingungen und laufen ruhig und stabil.
-
01.05.2018
Mit neuen Lösungen zum sicheren Prozess – Entlastungsbohrung für die Kurbelwelle bearbeiten
Wie ein Automobilhersteller mit dem MAPAL als Technologiepartner einen neuen Prozess sicher in die Serie bringt.
-
01.03.2018
Kleiner, hitzebeständiger und immer individueller - Anwendungsorientierte Spanntechnik bei MAPAL
Interview mit Produktmanager Jochen Schmidt über die Rolle der Spanntechnik im Zerspanungsprozess, 3D-Druck und digitale Services
-
01.02.2018
Geballte Flexibilität und Effizienz - Plandrehköpfe und Aufsatzwerkzeuge von MAPAL
An Komponenten für Strohballenpressen muss Bühring komplexe Konturen zerspanen. Wieso er sich für eine Werkzeuglösung von MAPAL entschieden hat …
-
01.01.2018
Präzise, wirtschaftlich und einfach in der Handhabung – Werkzeuge zur Bohrungsfeinbearbeitung von MAPAL
Interview mit Produktmanager Michael Neumann über Genauigkeit, Effizienz und Handling beim Reiben und Feinbohren
-
01.01.2018
Trockenbearbeitung von Schichtverbundwerkstoffen im Flugzeugbau
Die Endmontage von Flugzeugen hält für Werkzeughersteller besondere Herausforderungen bereit. MAPAL hat dafür spezielle Werkzeuge entwickelt.
Kontakt
Kathrin Rehor Public Relations Kathrin.Rehor@mapal.com Tel.: +49 7361 585 3342