Präzision in Form

MAPAL has defined the scroll compressor as a critical component in the field of electromobility. It has very high demands with respect to the machining quality and is required in high quantities. With specifications that are sometimes less than 20 µm, the form of the scroll spirals and perpendicularity have very tight tolerances. A surface finish with an average roughness depth in the single micrometre range is required for the flawless functionality of both spirals in relation to one another.

The machining process to manufacture the scrolls involves milling the surfaces of the spiral shapes as well as the top and base surfaces. The pre-machining process already comes very close to the final contour. A step milling cutter provides the finish for the face surface and spiral shapes during the fine machining that follows. In a single stroke, the tool moves inwards, turns around at the innermost point with the smallest radius, and then moves outwards again along the other side of the spiral shape. Special radii and transitions between the face surface and spiral call for extremely precise contours on the milling tool.
 

A milling blade must be selected that can both provide the required precision of form and achieve a long tool life. A MAPAL finish milling cutter can manage more than 2,000 parts made of the aluminium alloys AlSi1 and AlSi12, which are the most prevalent currently. For pre-machining, the specialists in Aalen ensure that as little material as possible remains but as much as needed to ensure safe processing. The milling cutter cuts the surface using low force, rather than pressing and deforming it.

Above all when it comes to finishing, there are many solution options available, which can be deployed based on requirements. MAPAL proceeds schematically in their project design according to the basic, performance or expert classification. “Basic” solutions are standard tools which can be used to produce and test initial prototypes. At the “performance” level, special tools with contour geometries for the component come into play. In addition to precise contour machining, the “expert” solutions concentrate above all on the longest tool lives for maximum processing efficiency for large series. Special coating is used here. A three-bladed tool with diamond coating represents the top of the line for aluminium alloys with high silicon content.
 

Als Komplettanbieter legt MAPAL den Gesamtprozess inklusive Taktzeitberechnung und Schnittdaten aus. Im Werkzeugpaket enthalten sind nicht nur die Fräser für die Bearbeitung der Spiralen, sondern auch alle weiteren Werkzeuge für den Verdichter. Je nach Maschine und Spindelanbindung bietet der Werkzeughersteller die passenden Spannmittel an, wobei Hydrodehnspannfutter mit HSK-E die erste Wahl sind.

Kommende Entwicklungen hat MAPAL dank seiner Marktkompetenz im Blick. So könnten neue Kältemittelvorgaben der EU dafür sorgen, dass das aktuell noch weit verbreitete Kältemittel R1234yf durch Propan oder CO2 ersetzt werden muss. Vor allem CO2 als Kältemittel hat erheblichen Einfluss auf die Bauteile. Das Hubvolumen wird deutlich kleiner bei gleichzeitig erheblich höherem Druck. 

Aktuelle Entwicklungen gehen daher in Richtung Grauguss oder Sphäroguss als Grundwerkstoff für die Scrollspiralen – mit entsprechenden Auswirkungen auf Zerspanungsprozess und Werkzeugkonzepte. Mit seinem breiten Produktprogramm und der Technologiekompetenz ist MAPAL in der Lage, schnell auf diese Entwicklungen zu reagieren und anwendungsorientierte Prozesslösungen anzubieten.