TOOLTRONICおよび フェーシングヘッド
TOOLTRONIC － マシニングセンタや専用機による製造の多様化と柔軟性に 対応する一般的な入力装置。マシニングセンタ用のTOOLTRONICは、交換 可能なツール軸であり広範囲の用途で使用可能です。
フェーシングヘッドは、主に専用機で大量生産を行う際に面旋削やリセス加 工、輪郭加工の目的で使用されます。このスライドツールの操作やツールホ ルダー、インサートの動作は、スピンドルドライブまたはフィードユニットの 背面にあるNC制御の横送り装置を介して行われます。
フェーシングヘッドは、主に専用機で大量生産を行う際に面旋削やリセス加 工、輪郭加工の目的で使用されます。このスライドツールの操作やツールホ ルダー、インサートの動作は、スピンドルドライブまたはフィードユニットの 背面にあるNC制御の横送り装置を介して行われます。
The mechatronic tool system TOOLTRONIC
The TOOLTRONIC mechatronic tool system implements actuation movements easily and reliably on both machining centers and special machines. The processing of contours, undercuts and non-cylindrical bores is just as possible as closed control loops for cutting edge compensation or the simple production of multi-variant part families.
With its inductive energy and bidirectional data transfer, the self-contained drive module represents a full-fledged NC axis integrated into the higher-level machine control. This means that the full functionality of modern CNC controls can also be used in conjunction with TOOLTRONIC.
Depending on the machining task, different facing heads (outputs) from MAPAL are used on the modular TOOLTRONIC connection. As standard, eccentric actuating tools (EAT) are used. Applications that require a large stroke with a tailored spindle speed are covered using linear actuating tools (LAT).
With its inductive energy and bidirectional data transfer, the self-contained drive module represents a full-fledged NC axis integrated into the higher-level machine control. This means that the full functionality of modern CNC controls can also be used in conjunction with TOOLTRONIC.
Depending on the machining task, different facing heads (outputs) from MAPAL are used on the modular TOOLTRONIC connection. As standard, eccentric actuating tools (EAT) are used. Applications that require a large stroke with a tailored spindle speed are covered using linear actuating tools (LAT).
Facing heads
Facing heads are used for face turning, recessing and machining contours predominantly in large-scale series production on special machines.
The operation of this slide tool and the actuation of the tool holder and inserts is via an NC-controlled crossfeed device that is on the spindle drive or on the rear of the feed unit.
The MAPAL standard range of facing heads consists of the following four concepts:
The operation of this slide tool and the actuation of the tool holder and inserts is via an NC-controlled crossfeed device that is on the spindle drive or on the rear of the feed unit.
The MAPAL standard range of facing heads consists of the following four concepts:
