Machining solutions for internal combustion engines

Focus components from the internal combustion engine sector

Cylinder head

Cylinder head

In the passenger car sector, the cylinder head is usually cast from aluminum alloys, whereby the structure and the features to be machined differ slightly depending on the engine fuel. It is mounted on the cylinder crankcase and is primarily responsible for the fuel and fresh air supply. Due to its extremely high quality and tolerance requirements, the cylinder head is the most demanding component to be machined in engine production. Precise valve control in the valve train and minimal friction losses in the camshaft bearings reduce fuel consumption and thus emissions even before the combustion process begins.

Machining highlights:

• Valve Train
• Injector bore
• Camshaft bearing bore
• Core plug bore

Learn more

Cylinder crankcase

シリンダーブロック

シリンダーブロックはエンジンブロックとも呼ばれ、あらゆる内燃エンジンの中心的な要素です。車種やエンジンサイズによって、直列2気筒エンジンからV型12気筒エンジンまで、様々な設計やサイズがあります。重量の優位性から、最近の自動車分野ではアルミ合金が主に使用されています。このため、自動車メーカーは、特にシリンダーボアに鋳造ライナーや耐摩耗性コーティングを使用し、長寿命を保証することを余儀なくされています。その結果、工具メーカーは、機械加工に混合加工や極めて研磨性の高いコーティングを使用することが多くなっています。最新エンジンの燃焼圧力の増大は、機械的および熱的負荷の要件も増大させ、とりわけ加工形状に対する品質要求の増大につながります。 

機械加工のハイライト 

• シリンダボア 
• クランクシャフトベアリングボア 
• ホーニングリリース 

Learn more

Connecting rod

High-strength steel materials such as 70MnVS4 or C70 are generally used for the connecting rods, which are subject to alternating heavy loads, in order to convert the linear movement of the pistons into a rotational movement of the crankshaft. In order to reduce the moving mass during engine operation, the components are reduced to a minimum weight. Over the years, this has resulted in an enormous number of variants with, for example, parallel, trapezoidal or stepped shapes, which entail a wide variety of tapping situations, especially when machining the small connecting rod eye. Due to the enormous production quantities, manufacturers are particularly focused on cost-effectiveness in series production.

Highlight machining:

• Large eye
• Small eye
• Screw hole drilling

Learn more

Turbocharger

Turbocharger

To increase the efficiency and performance of modern combustion engines, exhaust gas turbochargers are increasingly being used today. The compressed air supply via the turbocharger increases the efficiency of engines and at the same time reduces emissions. At speeds of up to 300,0001 rpm, it is imperative that quality requirements are met, especially with regard to coaxiality and roundness. Extremely abrasive high-alloy materials, especially on the exhaust gas side (turbine side), demand maximum wear resistance from the cutting tools. If the tool life quantities for the various machining operations are increased by even just a few components, this has an enormous cost benefit for the manufacturer.

Highlight machining turbocharger housing:

• Internal contour machining
• Exhaust manifold connection machining
• Control pin bore
• Turbocharger housing connecting Surface
• Shoulder milling of surfaces

Highlight machining Impeller / vane wheel:

Hot side:

• Shaft bore 
• Balancing surface

Cold side:

• Shaft bore
• Balancing surface 
• Vane machining

Learn more

Rocker/toggle lever

Rocker/toggle lever

The high-precision control of the valves for intake and exhaust is a decisive factor for the performance and efficiency of combustion engines. 4 valves per cylinder are usually controlled in the automotive sector, with 2 valves controlling the intake for fresh air or air/fuel mixture and 2 valves controlling the exhaust gas outlet. Depending on the engine design, various rocker arms or (roller) finger followers are used for OHV and SOHC valve actuation in order to minimize friction and the associated wear on the moving parts. In addition, the valve clearance can be set and readjusted via the integrated adjusting disks in order to maintain an optimum combustion process and prevent possible engine damage. 

Highlight machining:

• Fitting bore
• Bearing bore

Learn more

Rail

Rail

As in diesel engines known as common rail, fuel is now also injected into the combustion chamber of every second new petrol car via efficient direct injection systems, in which the air-fuel mixture is first formed in the combustion chamber. This enables more powerful petrol engines with reduced fuel consumption and lower exhaust emissions. The increasing pressure requirements of up to 2,500 bar are decisive for the use of moderately to difficult-to-machine materials such as cast steel or stainless steel.

Machining highlights:

• High-pressure Connection
• Injector bore
• End machining
• Connection machining
• Centrail rail bore

Learn more

Crankshaft

Crankshaft

The basic design of the crankshaft is largely determined by the number of cylinders and the engine layout. However, the steel shafts, which are generally forged, have to be made lighter and lighter to reduce emissions. This means that additional machining operations are required in the manufacture of the already complex components. Furthermore, due to the increasing combustion pressures of modern engines, the crankshaft is constantly exposed to increased bending and torsional stresses, which results in higher quality requirements. 

Highlight machining:

• Flange and spigot Surface
• Oil bore
• Central relief bore
• Face bearing bore

Learn more

Face and sealing surfaces

Face and sealing surfaces

Machining flat sealing surfaces in the combustion engine requires the utmost in dimensional accuracy, flatness and surface quality – often in dry conditions. MAPAL supplies high-performance face milling tools with maximum number of teeth, sturdy tool design and optimal chip removal. Whether roughing or finishing: The solutions are designed for cost-effectiveness, process reliability and component quality.

Learn more