The best deep bores with PCD

Schlote’s story begins in 1969 as a small workshop in Harsum, where the company is still headquartered. Today 11 companies with 1,800 employees belong to the Group. The OEM has eight factories in Germany as well as further manufacturing facilities in the Czech Republic and China. Schlote Group customers include big car manufacturers, system integrators and foundries. Schlote’s turnover stems from engines (55 per cent), transmissions (39 per cent) and chassis (6 per cent).

A successful cooperation with Trimet Aluminium already existed at other sites, manufacturing finished car components from cast blanks. The awarding of a contract for a component by a major OEM, which would involve very high quantities, led to a joint venture between Schlote and Bohai Trimet in Harzgerode.
 

The part being manufactured in Harzgerode is a clutch housing made of die-cast aluminium. A single version of the automatic transmission is being delivered to various major car manufacturers, where they are predominantly installed in vehicles with two-litre engines. The bell housing connects the transmission to the engine. While the transmission side is the same on all the clutch housings, the other side is adapted to the respective car manufacturer’s engine. The differences are mostly small, so the bell housing construction is 99 per cent identical for all of the car manufacturers.

Schlote Harzgerode GmbH is producing 4,000 parts per day currently. At over 80 per cent, the modern factory exhibits a very high degree of automation. Around the clock five days a week, 120 employees work at the Harzgerode site. Production can be expanded to six or seven days a week if need be.
 

As is the case for the entire automotive industry, the requirements placed on parts are very high here. “The part is not only an adapter flange, but also the back of the transmission. The bearing seats thus require the highest degree of precision”, explains Sebastian Swiniarski, Work Preparation Team Lead at Schlote. The part requires many bores with different tolerances, whereby precision manufacturing is needed down to the thousandth of a millimetre.

MAPAL and Schlote can look back on many years of effective cooperation. MAPAL is therefore entrusted with supplying PCD milling cutters (which create the defined rough surfaces on which sealant is applied), tap drills, reamers and an array of diverse drilling tools. “We offer our customers comprehensive solutions including the development of entire processes”, says Stefan Frick, MAPAL’s technical advisor to Schlote.
 

A watchful eye was kept on the implemented tools from the very beginning. Since Harzgerode went into operation, analyses have been performed continuously to find possible weak points and optimise manufacturing. Within the context of this continuous improvement process, Schlote and MAPAL have together managed to achieve longer tool lives, lower tool expenditures and higher production quantities over years. While 3,600 parts were produced at most per day in the beginning, the limit has now been raised to 4,500 parts – without the need for further machines.

The newest optimisation involves deep drilling for oil channels used to change gears in the automatic transmission. “We evaluate every month with our tool management system which tools have to be exchanged how often”, Swiniarski reports. “Time and again, the deep drills have proven to be particularly sensitive. As these drills are relatively cost intensive, we have concentrated on them to further cut our tool costs.” Quality aspects are also inherent in tool wear as a blunt drill produces burrs at the bore exit.
 

Newデザインの工具は、マパールの標準の超硬ソリッドドリルをベースに、先端に PCD 切刃を挿入しました。 このツールの構造は、超硬チップを備えたコンクリートドリルを彷彿とさせます。 Harzgerode の担当者は、PCD ディープドリルの工具寿命に非常に満足しています。 超硬ソリッドドリルの工具寿命は 2,500 部品を超えると終了しますが、PCD ディープドリルは 15,000 部品まで確実に加工出来ます。 材料のブローホールや鋳造品質の変化など、機械加工の課題には改善の余地があります。 「状況によって、PCD ディープドリルの寿命が 40,000 個に達することもあります。 当然のことながら、私たちはこの長い工具寿命を標準にしたいと考えています」とFrick 氏は強調します。

切削条件は、主軸速度 8,700 rpm、送り 0.3 mm/rev、切削速度 218 m/min における超硬ソリッドドリルの切削条件タと同じです。 新しいドリルの可能性は、工具寿命が大幅に長くなり、その結果工具コストが削減され、プロセスの信頼性が向上することにあります。 工具の交換が減れば、機械のダウンタイムも減ります。

Schlote社ハルツゲローデ工場 での生産には、合計 10 個の製造ラインがあります。 各ラインは、工作機械メーカー SW の 3 台のマシン (W06 ダブルスピンドル マシン 2 台と one6 シングルスピンドル マシン 1 台) で構成されています。 部品は 3 つのクランプ設定で加工され、ダブルスピンドル機械が最初の 2 つの設定を処理し、仕上げは 3 番目の設定で行われます。

Clutch housing manufacturing at the site was planned to last at least eight years with a peak output of 1.1 million parts per year. This peak was surpassed in 2020. Production has been ongoing for five years in the meanwhile with 900,000 parts produced per year.

Due to continuously improved productivity and the lower production quantities, there has been time to address future trends and produce different parts. The factory is already being modified for this purpose. The first of two new projects involves six different parts that Schlote is to produce for a hybrid model of super sports car manufacturer.

In the other project, Schlote’s expertise as a clutch housing manufacturer is once again called for – this time for an electric car. Schlote draws from the trend toward electric mobility by supplying e-cars with transmissions as well. For an innovative model with three gears, the connection between engine and transmission is to be produced in Harzgerode. Half of the factory capacity is currently being converted. The production of parts for combustion engines is to be ramped down to 50 per cent. In future, hybrid cars will account for 10 per cent and purely electric mobility for 40 per cent. Schlote has already produced the first parts for the new projects.