04.05.2023

News from the reaming and fine boring sector

MN reamers with short delivery times, new cutting materials for special requirements

#Reaming&FineBoring #产品
  • 1/3

    MN reamers in carbide and cermet versions can be delivered within ten working days. ©MAPAL 

  • 2/3

    The new HP016 and HP018 cutting materials from MAPAL are specially designed for the requirements involved in reaming high-alloyed and stainless steels, cast steel and hardened steel. ©MAPAL 

  • 3/3

    Thanks to optimisations in design, manufacturing and logistics, MAPAL supplies custom-made carbide and cermet reamers within ten working days. ©MAPAL 
MAPAL presents two brand new cutting materials: HP016 and HP018. They are specially designed for the requirements involved in reaming high-alloyed and stainless steels, cast steel and hardened steel. Cutting material HP016 is suitable for all machining operations involving a slightly interrupted cut, while cutting material HP018 is used for a continuous cut. Both are based on a silicon-doped PVD coating on two different varieties of carbides with low cobalt content, making them extremely resistant to wear and offering great dimensional accuracy.
The new HP016 and HP018 cutting materials from MAPAL are specially designed for the requirements involved in reaming high-alloyed and stainless steels, cast steel and hardened steel.   ©MAPAL

The PVD coating has a fine crystalline microstructure, combining high levels of hardness and ductility. The cutting materials are thermally very stable and offer impressive high-temperature stability and coating adhesion. To create an optimum surface in through bores and blind bores, the PVD coating is deposited in the µm range. This ensures the cutting edges retain their sharpness.

The new cutting materials are used for market launch in the reamers in the MN series by MAPAL, among others. These tools represent the utmost accuracy and are now also ideally suitable for use in hard reaming applications as well as reaming stainless steel thanks to the new cutting materials. They operate according to the MAPAL principle – with one insert and a guide pad opposite. Depending on the application, the guide pads are made from carbide, cermet or PCD.
 

  設計、生産、物流の最適化により、マパールは特殊仕様に設計した超硬およびサーメットのリーマを10営業日以内に供給します。（ドイツ本国のみ対応可）
シングルブレードリーマの納期を大幅に短縮するため、MAPALはポートフォリオを合理化し、現在は8シリーズのMNリーマに絞っています。設計、生産、物流の最適化により、マパールは特殊仕様に設計した超硬およびサーメットのリーマを10営業日以内に供給できる体制を整えました（ドイツ本国のみ対応可）。この分野では、これまで誰も実現できなかったことです。2種類の新しい切削材料に加え、一般的な被削材すべてに対応する多くの切削材料とコーティングが用意されています。ブレードは、AS、DZ、EK、SZのすべての標準切削リードで在庫品として納品可能です。

イノベーションとハイライト2023
Kathrin Rehor, PR Project Manager at MAPAL

Contact

Kathrin Rehor Public Relations Kathrin.Rehor@mapal.com Phone: +49 7361 585 3342

Further articles from the products area