Étrier de frein
L'étrier de frein est un composant important pour la sécurité du véhicule, soumis à de fortes contraintes thermiques et mécaniques. Lorsque la pédale de frein est actionnée, le liquide de frein est envoyé vers le piston de l'étrier, qui presse les plaquettes de frein contre le disque. Les formes de construction et le nombre de pistons varient en fonction du type de véhicule et de la motorisation.
Caractéristiques principales de l’aluminium
Caractéristiques et exigences d’usinage
Solid aluminium brake calipers are used for weight reduction. They are ideal for high performance vehicles and heavy models that require a rapid brake response.
- Safety-relevant component
- High demand on quality
- High quantities
- High chip volume depending on casting situation
- Tight tolerance fields due to process and machine capability in series production
- High process reliability and dimensional accuracy
- Multi-spindle machining or custom machine
- Cast iron: Higher machining force
1. Brake caliper connection
PCD Bore Milling Tool
- Pre-machining and fine machining on one tool
- Reverse circular milling of chamfer
2. Brake pad surface
PDC circular milling tool
- High number of teeth for low cutting force
- Burr-free milling due to perfect cutting-edge preparation
3. Piston bore
PCD boring tool
- Fine machining of close diameter tolerances
4. Seal and protection cap groove
PCD circular milling tool
- High form and dimensional accuracy due to laser-machined cutting edge
5. Oil bores
Solid Carbide Deep Drill
- Process-reliable chip removal for bore depths 20xD
- High cutting data due to optimal choice of coating
特性与加工要求
铸铁经常用于大规模生产,因为成本低廉, 并且不取决于机床方案都可以使用。
- 安全相关部件
- 高质量要求
- 大批量
- 高切除率取决于铸造情况
- 由于批量生产的工艺流程和机床能力, 公差范围狭窄
- 高工艺可靠性和尺寸精度
- 多轴加工或专用机床
- 铸铁:更高的切削加工力
1. 法兰面(接触面)
ISO钻铣组合
- 通过使用一把刀具加工两个特征以缩短 生产节拍时间
- 使用SPGN可转位刀片一次切削对法兰表面 进行经济的圆盘铣削
- 使用涂层整体硬质合金钻头钻削连接孔,可实现高切削值和长刀具使用寿命
2. 主孔
HPR400 高性能铰刀
- 用于精加工主孔的可互换切削刃
- 端面的HPR可换头用于在磨损情况下 方便更换刀具
- 以较低的刀具成本实现最高的生产率
- 无需设置切削刃
3. Dicht- und Schutzkappennut
ISO-Zirkularfräswerkzeug
- Tangentialtechnologie
- Bearbeiten von filigranen, radialen Nuten mit engen Toleranzanforderungen
- Höchste Rundlaufgenauigkeit der Schneiden für optimales Fräsergebnis
- Prozesssicheres Zerspanen durch Wendeschneidplatten mit Tangentialtechnologie
4. U-Face
Bohrwerkzeug mit Wendeschneidplatten
- Stirnseitige Vorbearbeitung der Hauptbohrung
- Kontrollschnitt der U-Fläche
- Wirtschaftliches Bearbeiten zweier Merkmale mit einem Werkzeug