Klein- und Mittelserie mit festen Werkzeugen
Ventilgehäuse EN-GJS-400-15 – Schieberbohrung
Ausgangssituation beim Kunden
- Einzelaufträge, kleinere und mittlere Stückzahlen
- Keine Möglichkeit zur Werkzeugeinstellung
- Geringe Durchlaufzeit gefordert
- Hohe Maschinenstundensätze
- Stabiler Aufweit-Honprozess vorhanden
- Werkzeugkonzept auf mehrere Bauteilvarianten abgestimmt
Special features of this solution
- No ring formation in the cavities due to special bore geometry → no costs for removal of rings
- Optimum results in the pre-machining due to a coordinated piloting and boring process → Support of boring tools in the pilot bore = optimum straightness, position
- High productivity with perfect pre-machining quality → High cutting values – machining time is reduced
Spool bore
1. Piloting
- Solid carbide-boring tool with six margin lands for perfect roundness and straightness
- Optimum chip flow and extended regrinding options through multicut technology and suitable coolant supply
2. Boring
- Solid carbide boring tool with three cutting edges and six margin lands and special lead geometry
- Straight bore, ideal chip flow und guide across the entire bore length
3. Control edge machining
- Significant cycle time savings with special solid carbide circular milling cutter
- Defined control edges without macroscopic flaws
4. Reaming
- Multi-bladed reamer for high cutting data
- Perfect chip control due to left-hand twist and optimum coolant supply
Advantages
- Minimal investment
- Low cycle time
- High availability of the machining centre
- Low production costs
- No tool setting required
- Option for regrinding worldwide