• Una selección de fresas de MAPAL.
  • Una selección de fresas con filos de corte reemplazables de MAPAL.

Fresas de zanco cilíndrico con filos fijos


El potente programa de fresas de zanco cilíndrico OptiMill de MAPAL garantiza unos resultados excelentes y seguros para todas las tareas de mecanizado. La rentabilidad y la calidad de los productos tienen una importancia fundamental para el cumplimiento de los requisitos de los clientes.
  • Orientación a la aplicación
  • Ventaja por flexibilidad
  • ​​​​​​​Siempre la elección correcta

Visión general de los productos

  • Las fresas de ranurar están codificadas por colores en una vista general del producto representada en 3D.
    1 / 7

    Fresado de ranuras y aplicaciones generales

    ​​​​​Fresas para aplicaciones generales.​​​​​​​
    ​​​​​​​
    1. Programa estándar OptiMill
    2. Desbaste de volumen elevado de viruta de componentes estructurales
    3. ​​​​​​​Fresado de modernos materiales de construcción ligera weitere Informationen
    Información adiciona
  • Las fresas angulares para desbaste se destacan en esta descripción general de productos renderizada en 3D.
    2 / 7

    Fresado de esquina – Desbaste

    Para lograr el máximo volumen de virutas. Ideal para el premecanizado con una gran cota a remover.
    ​​​​​​​Información adicional

    ​​​​
  • En esta presentación, la atención se centra en las fresas de esquina para acabado de MAPAL.
    3 / 7

    Fresado de esquina – Acabado

    Ideal para crear las máximas calidades superficiales. Mecanizado de acabado con cota a remover reducida.​​​​​​​
    ​​​​​​​Información adicional
  • Las fresas trocoidales de MAPAL están codificadas por colores en una vista general del producto renderizada en 3D.
    4 / 7

    Fresado trocoidal

    Volumen máximo de arranque de viruta en un tiempo y, al mismo tiempo, calidad superficial alta. Mecanizado previo y de acabado con una herramienta.​​​​​​​
    ​​​​​​​Información adicional
  • Las fresas de alto avance se destacan en este resumen de productos renderizado en 3D.
    5 / 7

    Fresas de avance elevado

    Especial para fresar con grandes avances y velocidades de corte extremas.​​​​​​​
    ​​​​​​​Información adicionaln
  • In this illustration, the focus is on profile milling cutters from MAPAL.
    6 / 7

    Profile milling cutters

    Contour and copy milling with high shape accuracy.
    ​​​​​​​further information
  • Milling cutters for chamfering, drill-milling and deburring from MAPAL are presented in this 3D rendered product overview.
    7 / 7

    Chamfering, drill and deburring milling cutters

    Cost-effective chamfering and deburring of pre-machined parts.
    ​​​​​​​further information
A selection of groove milling cutters from MAPAL.

Groove milling and general applications

Milling cutters for general applications. Excellently suited to groove milling.
  • Contact width ae up to 1xD
  • Diameter range from 1 to 25 mm (solid carbide)
  • PCD variants up to diameter 63 mm
  • Optimal chip transport
  • Large selection of lengths and geometries for all applications
  • High-performance substrate and modern coatings for excellent tool lives

The picture shows some shoulder milling cutters from MAPAL for roughing applications.

Shoulder milling – roughing

To achieve the highest material removal. Ideal for pre-machining with high stock removal.
  • High material removal rate (ae ~ 0.6xD)
  • Diameter range from 4 to 25 mm
  • New knurled profile for optimal force distribution on the cutting edge
  • Profile undercut roughing teeth
  • Unequal spacing for low vibration running

Shoulder milling cutters for finishing operations can be seen in this picture.

Shoulder milling – finishing

Ideal for producing the best surface finishes. Fine machining with low stock removal.
  • ​​​​​​​Low material removal rate (ae ≤ 0.1xD)
  • Diameter range from 4 to 32 mm
  • Large number of teeth
  • Optimal distribution of the cutting forces
  • Special design for hardened steels of 50-65 HRC

A selection of trochoidal milling cutters from MAPAL.

Trochoidal milling

Maximum material removal rate with high surface finish at the same time. Pre-machining and fine machining using one tool.
  • ​​​​​​​Cutting depths up to 3xD
  • Diameter range from 4 to 25 mm
  • Extra long cutting tool
  • Optimised unequal spacing and finely balanced cutting tool to protect the machine spindle and longer tool lives
  • Optimal chip transport
  • Usage with modern CAM system

The picture shows some high feed milling cutters from MAPAL.

Milling with high feeds

Especially for milling with high feeds and extreme cutting speeds.
  • ​​​​​​​Low cutting depth (ap = 0.05xD)
  • Diameter range from 8 to 25 mm
  • High feeds up to 1.35 mm per tooth at diameter 20 mm.
  • Inclined entry and pocket milling also with long projection lengths
  • Internal coolant supply for optimum chip removal

Profile milling cutters from MAPAL.

Profile milling

Contour and copy milling with high shape accuracy.
  • Low material removal rate (ap ~ 0.1xD, ae ~ 0.1xD)
  • Diameter range from 1 to 25 mm
  • Small diameter (from 1 mm) especially for milling tool steel and hardened steels from 50 to 65 HRC
  • Highest precision for tool and mould building
  • Close radius tolerances with full radius and toric end milling cutters

An overview from the MAPAL product range of milling cutters for chamfering, deburring and boring milling.

Chamfering, deburring and drill milling

Cost-effective chamfering and deburring of pre-machined parts.
  • Diameter range from 3 to 20 mm
  • Drill milling cutter for combination machining in one machining step, in particular for sheet metal and thin-walled parts
  • Designs with replaceable head system for highest flexibility and cost-effectiveness

Custom tools to order

Customer-specific custom tools made of solid carbide for highest requirements.
  • Realisation of complex geometries and contours for almost all applications
  • High-performance coatings for every material
  • Combination of several standard tools into one high-performance custom tool