Three milling cutters for machining

New innovative solutions for the HPR400 system

More productivity and process reliability with four new solutions for the HPR400 system

Complex processes and high quality requirements call for fine machining systems that are
effective, precise and easy to use. With HPR400 and HPR400 plus for ultra-productive reaming of large diameters, MAPAL is meeting precisely these requirements. The multi-bladed tool systems offer the advantage that the inserts with one (HPR400) or four (HPR400 plus) cutting edges can be exchanged by the customer directly on site and ensure maximum accuracy thanks to high-precision insert seats.
Con estas tres nuevas soluciones, MAPAL ofrece a los clientes de los sectores automotriz y de tecnología de fluidos herramientas sustentables, preparadas para el futuro, para tareas de mecanizado exigentes.
  • Photo of the HPR400 system with plug & play cutting system.
    1 / 4

    Sistema de insertos conectar y listo

    • Sin necesidad de ajustes al cambiar los insertos
    • Tiempos de parada de máquina reducidos
  • 2 / 4

    Ejecución de múltiples filos

    • Mayores velocidades de corte y avances
    • Tiempos de ciclo más cortos con calidad consistente
  • Photo of the HPR400 system with customizable tool configuration.
    3 / 4

    Configuración de herramientas personalizable

    • Diseño flexible para tareas específicas de mecanizado
    • Combinación con otros sistemas de herramientas
  • Photo of the HPR400 system.
    4 / 4

    Sistema HPR400

    • HPR400 para la máxima precisión
    • HPR400 plus para la máxima rentabilidad

Tres nuevas soluciones de aplicación práctica

  • The photo shows the one-lock solution.

    One-shot solution

    The combination tool with an ISO leading stage and HPR400 plus system enables the finishing of bores with high stock allowances (up to 6 mm) in a single step. The ISO part handles the main machining duties, while the HPR400 plus system takes care of finishing – with short cycle times and no setting effort required.

  • The picture shows the HPR400 plus for planing grooves.

    HPR400 plus for face grooves

    The new solution with indexable inserts with two usable cutting edges was designed for bores with specific base contours. It offers high stability and reliability and is particularly economical – ideal for steering knuckles and bearing bores with clearance at the bottom of the bore.

  • The photo shows the HPR400 with PCD cutting edges for stator housings.

    HPR400 with PCD inserts for stator housings

    MAPAL supplies a solution for finishing stator bores in electric motors with a higher number of cutting edges and no setting effort required. The result: high machining speed, low effort and high output – for high productivity.