• Una selezione di frese MAPAL.
  • Una selezione di frese con taglienti sostituibili di MAPAL.

Fresa di finitura con taglienti fissi

The high-performance end milling cutter programme OptiMill from MAPAL ensures excellent, reliable results during all machining tasks. The focus is on cost-effectiveness and product quality, along with meeting customer requirements.
​​​​​​​​​​​​​​
  • ​​​​​​​Application-orientated
  • Competitive edge through flexibility
  • Always the right choice

Product overview

  • Groove milling cutters are color-coded on a 3D rendered product overview.
    1 / 7

    Groove milling and general applications

    Milling cutters for general applications.
    ​​​​​​​
    1. ​​​​​​​OptiMill standard programme
    2. High volume machining of structural parts
    3. Milling modern lightweight materials
    further information
  • Shoulder milling cutters for roughing are highlighted on this 3D rendered product overview display.
    2 / 7

    Shoulder milling – roughing

    To achieve the highest material removal. Ideal for pre-machining with high stock removal.
    ​​​​​​​further information
  • In this illustration, the focus is on the shoulder milling cutters for finishing applications from MAPAL.
    3 / 7

    Shoulder milling – finishing

    Ideal for producing the best surface finishes. Fine machining with low stock removal.
    ​​​​​​​further information
  • The milling cutters for trochoidal milling from MAPAL are color-coded on this 3D rendered product overview.
    4 / 7

    Trochoidal milling

    Maximum material removal rate with high surface finish at the same time. Pre-machining and fine machining using one tool.
    ​​​​​​​further information
  • High feed milling cutters are highlighted on this 3D rendered product overview display.
    5 / 7

    High feed milling cutters

    Especially for milling with high feeds and extreme cutting speeds.
    ​​​​​​​further information
  • In this illustration, the focus is on profile milling cutters from MAPAL.
    6 / 7

    Profile milling cutters

    Contour and copy milling with high shape accuracy.
    ​​​​​​​further information
  • Milling cutters for chamfering, drill-milling and deburring from MAPAL are presented in this 3D rendered product overview.
    7 / 7

    Chamfering, drill and deburring milling cutters

    Cost-effective chamfering and deburring of pre-machined parts.
    ​​​​​​​further information
A selection of groove milling cutters from MAPAL.

Groove milling and general applications

Milling cutters for general applications. Excellently suited to groove milling.
  • Contact width ae up to 1xD
  • Diameter range from 1 to 25 mm (solid carbide)
  • PCD variants up to diameter 63 mm
  • Optimal chip transport
  • Large selection of lengths and geometries for all applications
  • High-performance substrate and modern coatings for excellent tool lives

The picture shows some shoulder milling cutters from MAPAL for roughing applications.

Shoulder milling – roughing

To achieve the highest material removal. Ideal for pre-machining with high stock removal.
  • High material removal rate (ae ~ 0.6xD)
  • Diameter range from 4 to 25 mm
  • New knurled profile for optimal force distribution on the cutting edge
  • Profile undercut roughing teeth
  • Unequal spacing for low vibration running

Shoulder milling cutters for finishing operations can be seen in this picture.

Shoulder milling – finishing

Ideal for producing the best surface finishes. Fine machining with low stock removal.
  • ​​​​​​​Low material removal rate (ae ≤ 0.1xD)
  • Diameter range from 4 to 32 mm
  • Large number of teeth
  • Optimal distribution of the cutting forces
  • Special design for hardened steels of 50-65 HRC

A selection of trochoidal milling cutters from MAPAL.

Trochoidal milling

Maximum material removal rate with high surface finish at the same time. Pre-machining and fine machining using one tool.
  • ​​​​​​​Cutting depths up to 3xD
  • Diameter range from 4 to 25 mm
  • Extra long cutting tool
  • Optimised unequal spacing and finely balanced cutting tool to protect the machine spindle and longer tool lives
  • Optimal chip transport
  • Usage with modern CAM system

The picture shows some high feed milling cutters from MAPAL.

Milling with high feeds

Especially for milling with high feeds and extreme cutting speeds.
  • ​​​​​​​Low cutting depth (ap = 0.05xD)
  • Diameter range from 8 to 25 mm
  • High feeds up to 1.35 mm per tooth at diameter 20 mm.
  • Inclined entry and pocket milling also with long projection lengths
  • Internal coolant supply for optimum chip removal

Profilfräser von MAPAL.

Profilfräsen

Kontur- und Kopierfräsen mit hoher Formgenauigkeit.
  • Kleine Zustellung (ap ~ 0,1xD, ae ~ 0,1xD)
  • Durchmesserbereich von 1 bis 25 mm
  • Kleine Durchmesser (ab 1 mm) speziell zum Fräsen von Werkzeugstahl und gehärteten Stählen von 50 bis 65 HRC
  • Höchste Präzision für Werkzeug- und Formenbau
  • Enge Radiustoleranzen bei Vollradius und Torusfräsern

Eine Übersicht aus dem MAPAL Produktprogramm an Fräsern zum Fasen, Entgraten und Bohrfräsen.

Fasen, Entgraten und Bohrfräsen

Wirtschaftliches Fasen und Entgraten von vorbearbeiteten Bauteilen.
  • Durchmesserbereich von 3 bis 20 mm
  • Bohrfräser für eine Kombinationsbearbeitung in einem Arbeitsgang, insbesondere für Bleche und dünnwandige Bauteile
  • Ausführungen mit Wechselkopfsystem für höchste Flexibilität und Wirtschaftlichkeit

Sonderwerkzeuge nach Maß

Kundenspezifische Sonderwerkzeuge aus Vollhartmetall für höchste Anforderungen.
  • Realisierung komplexer Geometrien und Konturen für nahezu alle Anwendungen
  • Leistungsfähige Beschichtungen für jeden Werkstoff
  • Zusammenfassen mehrerer Standardwerkzeuge zu einem leistungsfähigen Sonderwerkzeug