Aircraft and fuselage components machined with the MEGA-Drill-Composite MD-EdgePro shown on the right

MEGA-Drill-Composite-MD-EdgePro

Self-sharpening EdgePro technology for maximum tool life in multidirectional CFRP materials

Multidirectional CFRP materials are among the most challenging materials in machining. The MAPAL MEGA-Drill-Composite-MD-EdgePro has been specially developed for these applications and combines maximum cutting edge sharpness for flawless CFRP bores without fibre pull-out with high hole quality, long tool life and fast cutting speeds.
MEGA-Drill-Composite-MD-EdgePro
MEGA-Drill-Composite-MD-EdgePro

Clean cuts in CFRP composite materials require extremely sharp tools. Their cutting edges are consequently susceptible to wear and are therefore CVD diamond-coated. However, the coatings increase the cutting edge radius, which in turn has a negative impact on cutting performance. MAPAL addresses these challenges with the new EdgePro technology: The main cutting edge is laser-sharpened on the first clearance face. This process produces an extremely sharp cutting edge to prevent delamination. The remainder of the cutting edge is protected against wear by the CVD diamond coating.

The cutting-edge corner of the MEGA-Drill-Composite-MD-EdgePro is also designed for high stability. An integrated fibre catcher reliably cuts off protruding fibres that form when the drill is withdrawn. The newly developed HC611 CVD diamond coating also ensures low thermal loads and long cutting tool life. In addition to high hole quality and process reliability in series production, the drill enables cutting speeds up to 50% higher than those of conventional CFRP drills on the market.

The self-sharpening feature – which is unique on the market – offers further key benefits for users: consistently high hole quality and at least 50% longer cutting tool life. The MEGA-Drill-Composite-MD-EdgePro can be used wherever CFRP is machined – from the wind power and leisure industries to general industry. However, it delivers particular benefits in the aerospace industry, where the highest demands are placed on bore quality.

  • MEGA-Drill-Composite- MD-EdgePro Lasergeschärfte Hauptschneide mit Selbstschärfeeffekt
    1 / 4

    Lasergeschärfte Hauptschneide mit Selbstschärfeeffekt

    • Geringe Prozesstemperatur
    • Geringe Schnittkräfte
       
  • MEGA-Drill-Composite- MD-EdgePro 90° Spitzenwinkel
    2 / 4

    90° Spitzenwinkel

    • Sauberes und selbstzentrierendes Anbohren
    • Hohe Maßhaltigkeit
  • MEGA-Drill-Composite- MD-EdgePro Faserbrecher
    3 / 4

    Faserbrecher

    • Für delaminationsfreie Ein- und Austritte
    • Keine Faserüberstände
  • MEGA-Drill-Composite- MD-EdgePro Neue CVD-Diamantbeschichtung
    4 / 4

    Neue CVD-Diamantbeschichtung

    • Verschleißbeständig
    • Niedrige thermische Belastung
    • Ideal für abrasive Materialien
    • Sehr lange Standwege

Für weitere Informationen zum MEGA-Drill-Composite-MD-EdgePro kontaktieren Sie uns gerne:


Weitere Lösungen und Neuheiten 2026/27