Lowering costs with sophisticated tool solutions

Precision tools influence overall operating costs in various ways. First, and most obviously, there are the costs of the tool itself: the costs of purchasing and using the tools, including the cost of non-productive time – for example, when a tool needs to be replaced. But on top of this, cleverly designed tools have an impact on investment costs. For example, a customer might be able to avoid buying a new machine if suitable tools allow the machining to be carried out on their existing machines. Similarly, increased machine productivity reduces the number of machines that need to be purchased. It might even be possible to replace a special machining process by using the right tool. Process reliability is another factor on which tools can have a significant impact – for example, by avoiding the need for measuring tasks. And finally, gains can be made on rationalisation and cost-reduction when it comes to services, particularly in logistics, storage, and employee training.

Combination tools are the classical example for a direct reduction in operating costs. This is
demonstrated in the following example from the car industry: A transmission housing made of the cast aluminium alloy AlSi9Cu3 was machined on a standard machining centre with a hollow shank taper connection. More specifically, the process involved the drilling of recesses in the variable valve timing (VVT) system. The most important concern was the accuracy of the large diameter during cutting. The shape is pre-cast, requiring a stock removal of 2 – 4 mm. There is no pre-machining. In terms of tool design, the customer’s aims were

• to carry out the machining with as few tools as possible
• to increase productivity by combining tools
• to simultaneously maintain maximum weight and moment-of-tilt requirements

Due to its thin walls, the part was prone to vibration during machining. In combination with extreme length-to-diameter proportions, complicated shape characteristics, necessary control cuts, and tolerances in the IT6 range, the machining process placed high demands on the tool technology.

In contrast to the competition, MAPAL was able to achieve the machining with just one combination tool. With the tool’s lightweight construction, the weight and moment-of-tilt requirements are not a problem. The cycle time is also reduced; the annual production time saved amounts to a total of 833 hours. Based on machine operating costs of 100 euros per hour, the operator saves over 83,000 euros annually.

The main fields of application for tools with guide pads are reaming and fine boring applications
with extremely high shape and position tolerance requirements. The advantage of these tools is that diameter and back taper of the precision blades can be set with micrometre-accuracy.
However, the necessity of setting the diameter and back taper of the blades is also a disadvantage. These setting processes take time and expertise on the part of the operator. MAPAL has developed the EasyAdjust system to take this additional effort into account. A high-precision adjustment system with a cassette and pre-set back taper replaces one of the two setting processes. Accuracy is retained and handling is simplified.

Take, for example, the application of an external reamer with an internal diameter of 75 mm
equipped with the EasyAdjust system. In this case, the reamer machines pins on planetary
carriers made of heat-treated steel. At a diameter of 75 mm, the pins have a tolerance of 18 »m. The maximum permissible deviation of the cylindrical form is just 5 »m. The potential of the EasyAdjust system is particularly apparent in the case of external reamers. The adjustment controls on external reamers are di¡cult to access, making the setting process even harder. As a result, not having to complete the back taper adjustment makes a big difference. The high accuracy combined with an economical, four-bladed TEC indexable insert ensures the maximum cost-effectiveness of the machining: The external reamer operates on a machining centre at a cutting speed of 120 m/min and a feed rate of 60 mm/min. In this scenario, one cutting edge can machine 470 pins. A new indexable insert is only required after 1,880 pins.

By now, the advantages of digital connectivity are well-known. In cutting manufacturing, too,
digital possibilities have become an indispensable driving force in the overall operating costs. Nevertheless, the investment and start-up costs of digital services are often a hurdle for companies that carry out machining. Ultimately, their implementation in existing manufacturing processes often involves factors such as the need to modernise the available machinery or carry out new installations.

With c-Connect, the open-cloud platform c-Com offers a simple and economical way of networking machines. c-Connect makes it possible to digitally transfer tool measurement data from the setting fixture to the machine, registers inventory changes, and is able to monitor the machine status via various sensors and the c-Connect box. Simply, compatibly, and quickly. Operators benefit from cost-saving results immediately. Here are just some of the benefits:

• no chance of errors resulting from the manual inputting of tool data;
• information concerning the tools, such as their tool life, remains available after the tools have been removed;
• transparent data is available to all persons involved;
• machine downtimes are minimised.

MAPAL’s tool specialists are continuously developing product and process solutions with the
aim of achieving maximum cost-eœectiveness for their customers. With 70 years of experience, a broad range of products, and a global presence, the precision tools manufacturer offers customers future-proof and technologically leading solutions: “When looking at the overall costs, there are a lot of ways in which our tools can make a difference. For that reason, our technical advisors always design the tools specifically for each individual customer – and oœer a service warranty that we are able to fulfil optimally through our global service network”, emphasises Siegfried Wendel. “With the right technological partner at your side, completely new opportunities for cost savings become available.”