Steering housing
The steering gear transmits the rotational movement of the steering wheel via the tie rod to the front axle of the vehicle. The steering torque is transmitted via a rack and pinion in the steering housing. The trend towards steer-by-wire systems enables improved driving and steering characteristics. This technology also lays the foundation for self-driving cars by enabling more direct and precise steering. Overall, the steering gear plays a central role in the vehicle’s steering ability and safety.
Features and Machining Requirements
- Material: Alumínio ou magnésio
- Rugosidade definida Rz > 40 μm
- O componente de parede fina tende a vibrar
- Corte interrompido
- Furo da peça de pressão com requisitos de tolerância altos
- Ferramenta de peso elevado (dependendo da construção)
- Tolerâncias de posição e perfil estreitas
- Elevada precisão de posicionamento
- Soluções de ferramentas com construção complexa
- Requisitos elevados de dados de corte na produção em série
- Remoção confiável de cavacos devido à situação de fundição (ferramentas híbridas)
- Fixação instável
- Dependendo da construção e da tensão, usinagem de uma só vez
1. Rack bore
PCD boring tool
- Guide pads for maximum precision for deep bores with interrupted cut
2. Gear rack bore
PCD boring tool
- Thin-walled bore
- Unequal number of cutting edges for higher proportion of guidance in the bore
- Special axial cutting edge arrangement for a soft cut
3. Thruster bore
PCD boring tool
- Cost-effective machining of the thruster bore in a clamping system
- First stage with fine boring tool for tight tolerances and precise cutting edge adjustment
4. Thruster bore
PCD bore milling combination tool
- Machining bores with tight tolerances
- Circular milling of thread in the same bore
- Cost-effective machining of two features with one too
5. Retaining groove
PCD circular milling tool
- Cost-effective circular milling of delicate component contours
- Smart cutting edge arrangement for high surface quality